AOC A2272PWHT User Manual Download Page 55

55

TAIWAN

低功率電波輻射性電機管理辦法:

第十二條   經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自

變更頻率、加大功率或變更原設計之特性及功能。

第十四條   功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,

應立即停用,並改善至無干擾時方得繼續使用。 

前項合法通信,指依電信法規定作業之無線電通信。 

低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干

擾。

在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備,限於室內使用。

USA

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications.  However, there is no guarantee that 
interference will not occur in a particular installation.  If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one of the following measures:

 

− Reorient or relocate the receiving antenna.

 

− Increase the separation between the equipment and receiver.

 

− Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected.

 

− Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or 
transmitter.

Operations in the 5GHz products are restricted to indoor usage only. 

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled 
environment. This equipment should be installed and operated with minimum distance 20cm 
between the radiator & your body.
Note: The country code selection is for non-US model only and is not available to all US model. Per 
FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.

Summary of Contents for A2272PWHT

































































Reviews: