AOBO ENVIRONMENTAL NEW ENERGY (WUXI) CO., LTD.
Add: Industrial Concentration zone, Sumiao village, Qianqiao street Huishan District, Wuxi city, Jiangsu province, China
Tel: +86-510-83209451 Fax: +86-510-83203470
Web: http://www.aoboet.com.au E-mail: [email protected]
- 17 -
3.
At the first installation, make sure that the
main breaker is in the OFF position.
4.
Make sure the main breaker behind the OFF
position until it cannot go any further and
then push it to the ON position. If the breaker
moves to any other positions by itself, do not
use the battery. Contact AOBOET hot line or
your distributor.
5.
Press and hold the panel button for about 4
seconds and then release it after the four LED
lights on, measure the voltage at the terminal
block with a voltmeter. If the voltage is lower
than 45 V, do not use the battery and contact
AOBOET hot line or your distributor.
6.
Switch the main breaker OFF, and then
measure the voltage at the terminal block
with a voltmeter again. If the voltage is
higher than 0V, do not use the battery and
contact AOBOET hot line or your distributor.
7.
Replace the top cover and tighten the screws
to a torque of 0.25 N
·
m.
5.4
Installation the battery
To prevent the battery from moving, make sure the battery fixed to a wall.
