Step 3
1.Hold the
Wall Bracket Assembly[13A]
in the designated position(left side) and mark
the holes for drilling(Fig 5.1). Drill a 1/4" hole at each location and insert the
Wall Plugs[14]
(Fig 5.2,Fig 5.3). Attach the
Wall Bracket Assembly[13A]
using the
FH Screw ST4x35[15]
(Fig 5.4).
2.Insert the
Support Bar[02]
into the installed
Wall Bracket Assembly[13A]
.Temporarily
attach the remaining
Wall Bracket Assembly[13B]
to the opposite end of the
Support Bar[02]
. Place a level on top of the
Support Bar[02]
. Align the
Wall Bracket
Assembly[13B]
with the opposite vertical line from
Step 1
and mark the bracket’s position
on the wall(Fig 5.5).
3.Remove the
Support Bar[02]
. and position the
Wall Bracket Assembly [13B]
onto the
wall and mark the holes for drilling. Drill a 1/4" hole at each location and insert the
Wall
Plugs[14]
(Fig 5.6,Fig 5.7). Attach the
Wall Bracket Assembly[13B]
using the
FH Screw ST4x35[15]
(Fig 5.8).
0
1/4"
0
1/4"
Fig5
9
1
3
5
7
1-1/2"+(A")
FH Screw
ST4X35
8
6
[02]
[13B]
[13A]
FH Screw
ST4X35
4
2
Summary of Contents for SD-FRLS05901 Series
Page 26: ......
