Step 1:
Step 3:
Step 2:
Screw mounting
Slot
Fig 3
PG.7
INSTALLATION
1. Place water heater on wall and
slide onto mounting slots to secure.
2. Ensure water heater is level and
secure on wall.
1.Locate appropriate installation position
for the water heater.
2.Place template(provided) on wall and
use pencil to mark screw hole locations.
Make sure the outlet and inlet pointed
downward vertically.
If screw locations are in wall stud, drive
mounting screws directly into stud. If screw
locations are not in stud. Drilling three
0.24’’(6mm) diameter holes on the wall.
Insert the plastic anchors into the holes and
then drive screws into wall anchors.
