Anywave TSP-EAS-1, User Manual

Page: 8 / 30

TSP-EAS-1 User Manual
Version 1.6 5/10/2017 Page 8 of 30
3 Menu
3.1 Initialization
Connect the power supply of the unit and then turn on the MSP via the power switch located on the rear
panel. The initialization process takes about 10 seconds to finish for the main unit and about 30 seconds to
finish for the (optional) dynamic PSIP module.
The MSP incorporates a Dynamic PSIP Generator and Inserter, has 4 HD/SD SDI inputs, converts and
switches 4 CVBS inputs into 4 SDI outputs, supports 4 ASI inputs into an onboard Multiplexor with program
cherry-picking into 2 ASI outputs, and manages EAS control signals and switching. The module provides
manual switching between the 4 incoming SDI inputs and 4 converted SDI signals from CVBS sources, with
automatic EAS switching of EAS signal, which overrides all manual settings when an EAS trigger occurs.
The first step after turning on the unit is to confirm the desired input source (for video/audio, ASI in,
PSIP etc.). Please see Table 2~5 below for details.
3.2 Query Mode
Query mode is a mode which displays parameters and status of the MSP. There are five pages in query
mode. Press the "Right" or "Left" button to switch between different pages which are shown in Table 2
through 6 below.
Note: The settings shown in the tables below are for illustration purposes only and may be different from
those in actual use.
Table 2 First Page in Query Mode
ASIIN1 ASIIN2 ASIIN3 ASIIN4
19.390/4 10.000/2 N/A N/A
Table 3 Second Page in Query Mode
ASIOUT1 ASIOUT2 PSIP STATUS
4.600/2 4.600/2 Dynamic OK
Table 4 Third Page in Query Mode
CVBS1 CVBS2 CVBS3 CVBS4
OK ERR OK ERR
Table 5 Fourth Page in Query Mode
SDIIN1 SDIIN2 SDIIN3 SDIIN4
OK ERR OK ERR
Table 6 Fifth Page in Query Mode
SDIOUT1 SDOUT2 SDIOUT3 SDIOUT4
SOURCE