TSP-EAS-1 User Manual
Version 1.6 5/10/2017
Page 22 of 30
PSIP
o
“PSIP”
Displays the PSIP insertion source.
o
“STATUS”
Displays if MUX receives the PSIP data from dynamic PSIP module,
valid only when PSIP source is Dynamic.
o
“Overflow”
Displays if the received PSIP data rate exceeds the PSIP bandwidth, valid
only when PSIP source is Dynamic.
o
CVBS
o
“Status”
Displays if MSP detects the signal on particular CVBS input interface.
SDI IN
o
“Status”
Displays if MSP detects the signal on particular SDI input interface.
SDI OUT
o
“Status”
Displays if there are output signals on particular SDI out interface.
o
“Source”
Displays where the signal source of SDI output comes from.
