
VT1501 User Manual
V1.03
6
4. Vehicle Installation
1. Plug the cable anchor into the hole in
front of the USB port.
2. Loosen mounting nut.
3. Rotate the mounting bracket to the top
of the suction cup.
4. Push the bracket into the guides on top
of the device until it clicks and locks in
place.
5. After wiping the windscreen area with the wipe, press the suction cup to the windscreen
so the device has a clear view of the road. Swing the lever up to lock the suction cup in place.
Adjust the device before tightening the mounting nut.
6. Plug the power cable into the micro
USB port.
7. Push the cable into the cable anchor
and insert the anchor into the hole.
8. Use the adhesive cable holders to run
the cable around the edge of the
windscreen.