2
2
PREPARATION
Mobile installation
To install the transceiver, select a safe, convenient location inside
your vehicle that minimizes danger to your passengers and yourself
while the vehicle is in motion. Consider installing the unit at an appro-
priate position so that knees or legs will not strike it during sudden bra-
king of your vehicle. Try to pick a well ventilated location that is shielded
from direct sunlight.
The bracket must be installed so that the 3 screw hole positions
•
on the side of the mounting bracket are towards the rear of
the bracket.
Self-tapping screw (5mmX16mm)
Spring washer
Flat washer
Position the transceiver, then insert and tighten the supplied
22
hexagon SEMS screws and flat washers.
Double check that all hardware is tightened to prevent vehicle
•
vibration from loosening the bracket or transceiver.
Determine the appropriate angle of the transceiver, using the
•
3 screw hole positions on the side of the mounting bracket.
Install the mounting bracket in the vehicle using the supplied self-
12
tapping screws (4pcs), flat washers (4pcs), and spring washers
(4pcs).
