17
7
CHANNEL OPERATIONS
SCAN
SCAN
SCAN
ENTER
ENTER
ENTER
ENTER
CALL
CALL
V/M
V/M
SQ/C
Note:
This operation is invalid in channel number mode. under frequency
mode (VFO), channel operations will be stored for longterm.
CTCSS/DCS Encode Setup
CTCSS/DCS Decode Setup
Under channel mode, channel operations can edit current channel
function for temporary use, when power off or channel has been
changed, the relevant setup will be deleted automatically.
Press key to enter the channel function menu.
12
Repeatedly press key or Microphone [
22
UP/DOWN
] key to
select the menus to be set.
Turn selector knob to choose the selected content.
32
Press key or key to confirm and exit the setup.
42
Press key to enter function menu.
12
Repeatedly press key or Microphone [
22
UP/DOWN
] key until
LCD displays “
CTCSS/DCS ENCODE
”
Press key to select CTCSS,DCS or OFF, when DCS selected,
32
press key to select positive or inverse code.
Turn selector knob to select desired CTCSS/DCS code.
42
CTCSS code: 62.5Hz-254.1Hz, 51 groups utmost.
52
DCS code: 000N-777I, total 1024 groups, N stands for positive
62
code, I stands for inverse code. Default :023N
Press key to enter function menu.
12
Repeatedly press key or Microphone [
22
UP/DOWN
] key until
LCD displays “
CTCSS/DCS DECODE
”.
Press key to select CTCSS,DCS or OFF, when DCS selected,
32
press key to select positive or inverse code.
Turn selector knob to select desired CTCSS/DCS code.
42
CTCSS code: 62.5Hz-254.1Hz, 51 groups utmost.
52
DCS code: 000N-777I, total 1024 groups, N stands for positive
62
code, I stands for inverse code. Default: 023N
Add Or Cancel DTMF/2-Tone/5-Tone Signaling
DTMF/2-Tone/5-Tone signaling are similar to CTCSS/DCS, while
DTMF and 5-Tone have other special functions including ANI, PTT
ID, Call All, Group Call, Signal Call, Alarm, Remote Stun, Remote
Kill, Wake Up, Tail Eliminating. for more information and setup,
please refer to the help option in the programming software.
While standby the operations as following.
