29
9
MICROPHONE OPERATIONS
SCAN
Display Mode Setup
♦
Short call
♦
Channel operations
♦
Transmitting Pre-stored DTMF Encode
♦
Edit And Pre-store DTMF Encode
♦
Input channel via Microphone keyboard
♦
Input Frequency Via Microphone Keyboard
♦
While standby, press key to switch between channel mode and
frequency mode.
While standby, press key to transmit selected signaling (DTMF,2-
Tone, 5-Tone)
While standby, press key to enter channel operations function,
repeatedly press key or Microphone [
UP/DOWN
] key to select
the function options, Turn selector knob to select the desired setup.
Then press key to confirm selection and exit.
Note:
Invalid in channel number mode.
While standby, press key to check pre-stored DTMF codes, then
press [
UP/DOWN
] key to select a group. Now you can press [
PTT
]
key to transmit current DTMF signaling.
While standby, press key to check pre-stored DTMF codes, then
press [
UP/DOWN
] key to select a group for edited and pre-stored.
Press key to enter DTMF editing mode.
You can input the desired DTMF data though the number keys,
then press [
PTT
] key to transmit and store the DTMF data.
You can input the desired frequency directly via the number keys
While in frequency mode(VFO), e.g, when 150Mhz desired, just
press six numbers to switch frequency to
150MHz.
While in frchannel number mode or channel name
+channel number mode, input three numbers (001 -250) to switch to
a desired channel. If an unedited channel being selected, the transceiver
will emit a beep sound for error, the transceiver will resume to
current channel. e.g, input is for channel number 5,
for channel number 55, for channel number 225.
SQ/C
