AnyCubic Kobra Go, User Manual, Page: 27 / 35

27
Introduction to slicing software
l
Print online
Printing online requires the installation of a driver. And you can control the
printer through Cura after connecting the data cable.
(1) Turn on the machine, connect the printer (data cable port) and your PC via
data cable. The driver may not be installed automatically, so it is required to
check that. Right-mouse click “This PC” → “Properties” → “Device
manager”, if there is an exclamation mark as shown below, then it needs to be
installed manually.
* Anycubic Kobra Go uses CH340 chip for communication.
* CH340 driver file path: “Files_English_Anycubic Kobra Go” →
“Driver_CH341”. There are two versions, Windows and Mac version. (* CH341
driver file is suitable for CH340 chip).
Users may have a different COM
number which depends on the PC.
Exclamation Mark