AnyCubic Kobra Go, User Manual, Page: 12 / 35

12
Installation
1. For detailed installation procedures, refer to the installation instructions in
the attachment.
2. Be cautious during assembly as some parts may have sharp edges.
3. It is suggested to use a flat desktop and place the parts in an orderly manner
for quick assembly.
4. The color of some parts may be different from what in the manual, but the
assembly is the same.
5. Firmware has been pre-uploaded to the motherboard. After completing the
assembly, please level the platform and load the filament then you could
start the first test print.
Note: Every unit of the printer has been inspected and tested for printing.
Therefore, in some cases, there might be very small marks left on the print head
or on the heated bed. Those will not affect the printing quality and those mean
the printer has been tested for the quality. If there are some tiny scratches on the
aluminum beams or slight unevenness on the platform, it is normal and won’t
affect the printing quality. Thank you very much for your kind understanding.
Team
ANY CUBIC