Anycom Milos-9, User Manual

Page: 20 / 76

Page 6
English - Milos-9
6. Making a call
U
SING PHONE
’
S KEYPAD
•
Dial number on keypad.
•
Press phone’s “send/call” key
•
If your phone does not automatically transfer the call to the headset, press MFB for 2 seconds.
U
SING VOICE DIAL
•
Make sure the voice dialling function is set up in the mobile phone and it is within the range of the headset.
•
Press MFB on the MILOS-9 shortly. There is a beep tone on the headset.
•
Then use your recorded voice commands (e.g. by saying the name of the person).
•
The call will be connected in a few seconds.
L
AST
N
UMBER RE
-
DIAL
•
Press and hold volume down button until 4 tones are heard.
•
It indicates the re-dial is active
.
7. Ending a call
•
Press the MFB briefly to end an active call. You can also end your call from your mobile phone.
8. Reject an incoming call
•
Press and hold the MFB for 2 seconds and release button when you hear a beep tone.
9. Answering a call
•
Press the MFB briefly to answer an incoming call.
10. Transferring a call
You can transfer a call from the headset to your mobile phone without interrupting the connection:
•
Headset to phone: Press MFB for 2 seconds
•
Phone to headset: Follow the operating instructions of your mobile phone