24 (38)
4.4
Factory Restore
Any one of these actions will restore the factory default settings:
•
Holding
MODE
pressed for >10 seconds and then releasing it
•
Executing
Easy Config Mode 2
•
Clicking on
Factory Restore
on the
System Settings
page
•
Issuing the AT command
AT&F
and then restarting the unit
Default Network Settings
IP Assignment
Static
IP Address
192.168.0.99
Subnet Mask
255.255.255.0
Default Gateway
192.168.0.99
Default WLAN Settings
Operating Mode
Client
Channel Bands
2.4 GHz & 5 GHz
Authentication Mode
WPA/WPA2–PSK
Channel
Auto
Bridge Mode
Layer 3 IP forward
Default Bluetooth Settings
Operating Mode
PANU (Client)
Local Name
[generated from MAC address]
Security Mode
Just works
Default System Settings
Password
[empty]
Setting a secure password for the unit is strongly recommended.
Anybus
®
Wireless Bridge II
™
User Manual
SCM-1202-032 EN 1.6
