Commands
49
Doc.Id. SCM-1200-093
Anybus Communicator for Modbus Plus
Doc.Rev. 3.01
8.3.4 Editing a Command
As mentioned previously, the transaction section in the Command Editor represents the actual transac-
tions associated with the command. Each column represents a frame object within the transaction.
Each column features four rows with the following parameters:
• Query/Response/Produce/Consume
The upper right cell indicates the direction of the transaction.
• DisplayName
Each column can be named so that the different parts of the command appears in a more user
friendly manner when editing its settings in the Transaction Editor or in the Parameter Section
of the Main Window.
• ObjectType
This row specifies the type of frame object that shall be used for the column.
• Value
This row specifies where the frame object shall retrieve its value/settings.
Value
Description
Depend
This setting is only relevant for Responses in Master Mode.
The value will be retrieved from the corresponding part of the ‘Query’-transaction.
Id
The value will be retrieved from the ‘Command ID’-setting (see “Basic Navigation” on page
47).
User
The settings associated with the object can be edited by the user.
[SlaveAddress] The value will be retrieved from the ‘SlaveAddress’-parameter (see “Node Parameters” on
page 31).
(other settings) Other settings are no longer supported.
Summary of Contents for Communicator Modbus plus
Page 83: ......
