4
Make sure correct wiring between M5 Pro and SC011, power on them, then move slide switch to
‘PROGRAM MODE’ as below:
Authorization
Mode
Power On：
Red Light
Between M5 Pro and Anviz SAC844 or other Access Controller as below:
Match registered fingerprint or swipe
registered card on M5 Pro, then SC011 will
beep once, means authorized successfully.
Then move slide switch to right(OFF).
1. Anviz Wiegand data output format:
ALL registered users output devieces’ last eight serial number.(For example, SN of one device
is 1050000014470004, then Anviz Wiegand output 14470004.)
2. Wiegand 26 data output format:
Card user:
Output card number.(Decimal)
Fingerprint user:
Output ID number
3. Wiegand output format can be set by PC software
Wiegand 26 Wiring:
SC011 authorization setting:
Switch in‘PROGRAM’on the SC011: Move slide swith to left(ON).
Wiegand data output format:
5
