User Manual
45
duplication of authentication of users. The default is disabled.
[Ring function]: It is disabled by default, according to the actual needs of their own settings
(This feature applies to support a bell function of the model).
[Wiegand Mode]: There are two modes: Encrypted Anviz wiegand, wiegand 26, fixed wiegand
area code and card number mode wiegand. Default Wiegand 26 (for supported Wiegand
outputs of attendance).
[Fixed Wiegand area code]: If you upload the same fingerprint ID number to two different
machines than by wiegand signal output after the number will be different. Wiegand code set at
this time if these two machines of the same words, wiegand signal output on the same number.
[Relay time]: Means connected with the lock to open the door after attendance by relay. The
maximum delay of 15 seconds (for support electric lock signal output attendance).
After setting, click [OK] button to save the settings.
4.1.6 Ring Settings
Bell used to set the time, this feature is available for support functions attendance bell.
Click [Ring Settings] button to open the [Set ting time] window:
Set the desired time bell rang the bell at the time of the entry box. Click [+ Add] button to add
time to time list. When the time list for invalid bell time, you can delete the invalid time. Select
left invalid ring time, click [ -Delete] button to bring up the dialog box to confirm the deletion:
Click [Yes ] button to delete the selected bell time; Click [No] button to cancel the deletion.
4.1.7 Access Setting
Group management for door open timetable support access control function support
devices(VF30
、
VP30
、
TC550
、
OC500 etc.), This function is only for the terminals which have
the access control output.