Antunes HEBT-3V, Manual

Page: 13 / 28

HEBT-3V BUN TOASTER
13 P/N 1011328 Rev. I 04/18
McDonald’s
MAINTENANCE (continued)
Figure 12. Accessing Top Cooling Fan
Clean Cooling Fans and Electrical
Housings (Annually)
1. Turn the toaster’s power switch to the off position.
The toaster enters a cool-down mode and will
automatically shut down when complete. Unplug
the power cord.
2. Remove the bun feeder and set aside.
3. Remove the top two screws from the control
housing cover and slowly lower the cover.
4. Remove any debris or dust from the cooling fan
with a small brush. Wipe away any debris with a
clean, dry towel Inspect the electrical compart-
ment for crumbs and debris. Clean out all crumbs
and debris using a clean, dry towel or nylon
bristled brush. Be careful not to disrupt any of the
electrical wiring.
5. Slowly close the control housing cover.
Reconnect with the screws.
6. Remove the screws from the bottom plate on the
rear of the unit and slowly lower the cover.
7. Remove any debris or dust from the cooling fan
with a small brush. Wipe away any debris with
a clean, dry towel. Inspect the electrical com-
partment for crumbs and debris. Clean out the
crumbs and debris using a clean, dry towel or
nylon bristled brush. Be careful not to disrupt any
of the electrical wiring.
8. Close the bottom plate and re-install the screws.
9. Reattach the bun feeder. Plug in the power cord,
turn the power on, and test the unit before return-
ing it to service.
Figure 13. Accessing Rear Cooling Fan