UFL-420/440 WATER FILTRATION SYSTEM
3
P/N 1010873 Rev. C 05/05
Purchased From:
Date of Purchase:
Model No.:
Serial No.:
Mfg. No.:
Throughout this manual, you will find the following
safety words and symbols that signify important safety
issues with regards to operating or maintaining the unit.
WARNING
GENERAL WARNING. Indicates informa-
tion important to the proper operation of
the equipment. Failure to observe may
result in damage to the equipment and/or
severe bodily injury or death.
WARNING
ELECTRICAL WARNING. Indicates infor-
mation relating to possible shock hazard.
Failure to observe may result in damage
to the equipment and/or severe bodily
injury or death.
CAUTION
GENERAL CAUTION. Indicates informa-
tion important to the proper operation of
the equipment. Failure to observe may
result in damage to the equipment.
IMPORTANT SAFETY INFORMATION
In addition to the warnings and cautions in this manual,
use the following guidelines for safe operation of the
unit.
• Read all instructions before using equipment.
• Install or locate the equipment only for its intend-
ed use as described in this manual. Do not use
corrosive chemicals in this equipment.
• Do not operate this equipment if it has a dam-
aged cord or plug; if it is not working properly, or
if it has been damaged or dropped.
• This equipment should be serviced by quali-
fied personnel only. Contact Antunes Filtration
Technologies for repair.
• Do not immerse cord or plug in water.
• Keep cord away from heated surfaces.
Service/Technical Assistance
If you experience any problems with the installation
or operation of your unit, contact Antunes Filtration
Technologies at
1-630-784-1000
, or toll free in the
United States at
1-800-253-2991
.
Fill in the information in the next column and have it
handy when calling for assistance. The serial number
is on the specification plate located on the unit.
OWNER INFORMATION (continued)
IMPORTANT
A.J. Antunes and Company reserves the right to change specifications and product
design without notice. Such revisions do not entitle the buyer to corresponding chang-
es, improvements, additions or replacements for previously purchased equipment.
