Antunes, AJ UTX-200 Manual Download

Page: 7 / 20

Universal ToasTer UTX-200

P/N 1010904 Rev. B 03/12

McDonald’s

A.J. Antunes & Co.

operating instructions

note: to ensure proper operation, toast some test

product at the start of each day or whenever the

unit mode is changed.
note: the UtX-200 has three operational modes:

Bagel and Muffin (breakfast) and Lunch (Crowns

and Heels). the unit always starts up in Muffin

Mode.

oPeration

SELECT

note: if the toasting quality needs adjustment,

refer to the section titled “adjusting toasting

Quality” in the operation section of this manual.

Testing 20

#####, #####, #####

PRGM

MOTOR

PLTN

I/R

NEXT

PREV

SELECT

BREAKFAST/LUNCH

ADJUST

Antunes UTX-200

#####, #####, #####

PRGM

MOTOR

PLTN

I/R

NEXT

PREV

SELECT

BREAKFAST/LUNCH

ADJUST

The unit displays

this message for

approximately 2

seconds.

The unit performs

a 20 second

system check.

The bottom line

refers to the

current software

version

The bottom line

refers to the

current software

version

SELECT

Power ON

Turn the Power Switch On.

The unit “clicks” three times. This is normal

The unit start up mode includes a 20 second system check.

Muffin Wait

PRGM

MOTOR

PLTN

I/R

NEXT

PREV

SELECT

BREAKFAST/LUNCH

ADJUST

Muffin Ready

PRGM

MOTOR

PLTN

I/R

NEXT

PREV

SELECT

BREAKFAST/LUNCH

ADJUST

The unit displays the Muffin Ready message when it reaches

proper operating temperature for Breakfast.

After the system check, the unit displays the

Muffin Wait

message. The

Muffin Wait

message means the unit is

warming up. This stage lasts approximately 20 minutes.

Press one of the Muffin/Bagel Selector buttons to switch

between Muffin and Bagel mode.

switching between Muffin and bagel Mode

Summary of Contents for UTX-200





















Search results

Summary of Contents for UTX-200

Reviews:

Related manuals for UTX-200

Brands by name

Popular brands

Antunes, AJ UTX-200, Manual

Search results

Summary of Contents for UTX-200

Reviews:

Related manuals for UTX-200

Brands by name

Popular brands