ANTUMBRA FADE, Manual

Page: 9 / 16

06. BILL OF MATERIALS
QTY PART
2 1K RESISTOR (0603 SMD • 1%)
1 10K RESISTOR (0603 SMD • 1%)
9 100K RESISTOR (0603 SMD • 0.1% • THIN FILM)
6 100NF CAPACITOR (0603 SMD • >= 16V)
1 22PF CAPACITOR (0603 SMD • <= 2%, >= 25V)
2 10UF ELECTROLYTIC CAPACITOR (SMD • >= 25V)
2 1N5819HW DIODE
(SOD123)
1 LM4040 (SOT23 • 10V)
1 TL072 DUAL OP-AMP (SOIC8)
2 LME49720 DUAL OP-AMP (SOIC8)
1 LM321MF (SOT23-5)
1 SLIDE POT (B10K)
1 LED (3MM • RED/GREEN • 2 TERMINALS)
2 2X8 MALE HEADER (2.54MM LEAD SPACING)
3 1X3 MALE HEADER (2.54MM LEAD SPACING)
QTY PART
3 JUMPER (2.54MM LEAD SPACING)
1 10MM SPACER
2 THONKICONN JACK
2 M3X5 SCREW
1 SLIDE POT KNOB
DETAILED EXCEL SHEET WITH PART NAMES, NUMBERS
AND LINKS:
HERE
MOUSER CART: HERE
NOTE: jacks, screw and pot knob is not included in the
cart! See the excel sheet about these.