USER MANUAL
PAGE 7
ANTTRON ©2019
TRM23F
5.2 - Programming the modulator module (DTVDM3F)
In the right corner above you can program the DVBT modulator DTVDM3F.
You can enter NIT version, ONID, NID,
LCN mode and Network Name.
For each output channel (use the small
arrows to go from one output channel to
the next and vice versa) you can adjust
the frequency , T.S. Id, modulation pa-
rameters and output level.
5.3 - Adding programs to the output
If satellite programs are being received, they will be listed in the table below the settings for input and
output. The list contains the origin (input B or C) the service ID, service name, the symbol for a TV
program or radio program and a symbol indicating if it concerns a FTA or scrambled program.
In the modulation column, you have the ability to add this program to one of the three output channels
by double clicking the
symbol. The symbol will change into
, indicating that the channel has
been added to this speci
fi
c channel.
Furthermore you can add a LCN number to the program and you can change the service ID (most right
column) of the program when it is transmitted in the output.
When adding channels to the output channel(s), you will see that the bandwidth occuption for a specif-
ic channel increases. It is wise not to exceed about 80% of the channel capacity in order not to create
possible over
fl
ows.