USER MANUAL
PAGE 6
ANTTRON ©2019
TRM23F
5.1 - Programming the satellite receiver module (DTVRR2)
In the left corner above you can select the tuner B or C. For each tuner you can input the satellite fre-
quency, symbol rate, polarity and DiSEqc input (in the case you are making connection
to a satellite multiswitch.)
If valid parameters are entered and a satellite signal is present, the LED indication
besides Level and S.N.R indication will turn into green indicating that the tuner has
locked. At the same time an indication is given on signal strength and quality.
Below these
fi
elds you have a slider for rate.
This is only needed for systems having a CI slot, the value can be left at 160 Mb/s in
this case.
Also, the indications for watchdog and Remove CAT/EMM are only intended for systems
having a CI slot.
