Antti-Teollisuus Oy
7
408012
06-2018
Attachment of the frame plate (E-model)
In the vertical direction the location for the machinery must be selected so that none of theelevator
pipe joints are positioned either at the frame plate (part 1) or at the draw support (part3). Fix the frame plate at the
four points shown in Fig. 2. It pays to put the screws for the sup-port against buckling (part 19) in place before fi
xing. See “Supporting the linear actuator rod”on the next page.
Fig. 2.
Attachment of the frame plate to the elevator pipe.
Cover plate of elevator pipe
Side plate of elevator pipe
Frame plate
Fixing points
13. Hexagon screw M8x30
14. Nut M8