
ENM - OM V2.2 01.02-05
Note:
It is recommended to synchronize the time once a day, recording the current time in cell
20 according to the MODBUS RS 485 protocols.
1.5.5
When the time set in the timer expires or an external command is received,
the Device returns to its initial state (turns off the LEDs and enters standby mode).
Changing the Device settings is performed with the help of the client software.
Figure 3. Installing the Device in the switchgear and control gear cell
1.5.6
The Device is equipped with an LCD indicator which displays the following
information: the line status and the current measured values.
1.5.7
The Device is connected to the current sensors installed on the high-voltage
cable on the phase conductors A, B, C in the controlled cell of the switchgear and control
gear. It is also possible to connect the Device to a voltage transformer mounted on the
monitored section/bus system or to measuring support insulators.
9
Feeder Monitor
LODESTAR FM-CS