Antop AP-M1 Series, User Manual

Page: 6 / 10

ON/OFF:
Press the
“ ON/OFF ” button, the
indicate light will turn from
slightly bright to bright. At
the same time the other
button start to slightly
bright.
Fan Speed:
Press the “ Fan
Speed ” button, the light
will turn to bright, with
default Mid Wind. And you
can select 4 different fan
speed (High, Mid, Low,
Sleep). When you set the
fan speed at High, Mid,
Low, the ambient light will
turn on. Ambient light turn
off at sleep mode.
Timer:
Press the
“ Timer ” button,
the light will turn to bright;
you can select 2h, 4h, 6h,
8h countdown and always-
on mode. Once you finish
the selection, the
countdown time indicate
light will turn on. Default
starting up with always-on
mode.
Negative Air Ions
(NAIs):
Press the “ NAIs ” button,
indicate light will turn
bright. The Negative-ion
generator start to release
NAIs. Press again to close
it.
UVC:
Press the “ UV ”
button, the indicate light
will turn bright. The UVC
Sterilization Lamp will start
to operate. Press again to
close it.
PLEAE DO NOT LOOK DIRECT TO THE UVC LAMP,
HARMFUL TO EYES AND SKIN.