Here you can see how the
E1 connector
is installed:
You can find the video instructions here:
E1
connector connects
two panels
together (above each other). One
connector
consist two parts. To
connect
two panels
you will need one pair of
E1 connectors
.
You can reinforce all joints made with these
connectors
with a
set of pins
. They eliminate
clearances at the joint and prevent the
bolt
thread from squeezing under long-term and high joint loads. Here
are how to install the
connectors
with a
set of pins
:
ATTENTION:
It is not mandatory to use pins, those are rarely used/required.
Wherever the gap between two panels is bigger than
89 mm
you must use
wooden rod with cotters
. The
rod is inserted to any of
T1, T2
or
T3 connector
.
3