The
inclined plane
can be also used as a counter, table, bridge or as an inclined surface to exercise with
your own weight. The
inclined planes
can be interconnected, increasing their length. To do so you need 1 x
SL1 connector
and 8 x
bolts 35
.
You can find out more about the load capacity of the connected
inclined
planes
in the load capacity section.
The
inclined plane
can be improved with the inclined plane
ending
and
small
M1 handles
(those are, at the same time, used as a safety feature to avoid potential
plane
disconnection) or large
M2 handles
.
The small
M1 handles
should be turned so that the circular part under the bolt head fits into the circular hole
(shown under the letter A). By placing the small
M1 handles
correctly, you will prevent the inclined plane from
being unintentionally pulled out of the panel. The hooks on the handles act as a locking system (shown under
the letter B)
Where appropriate and safe, you can hang the
balance board
. In our product range you can find
classic
, or
poma
balance board
.
11