Anton/Bauer 8475-0141, User Manual

Page: 4 / 15

4
Important information on the safe installation and operation of this
product. Read this information before operating the product. For
your personal safety, read these instructions. Do not operate the
product if you do not understand how to use it safely. Save these
instructions for future reference.
Warning Symbols Used in these Instructions
Safety cautions are included in these instructions. These safety
instructions must be followed to avoid possible personal injury
and avoid possible damage to the product.
WARNING! Where there is a risk of personal injury
or injury to others, comments appear supported by
the warning triangle symbol. Where there is a risk
of damage to the product, associated equipment,
process or surroundings, comments appear
supported by the word ‘Caution’.
ELECTRIC SHOCK
Where there is a risk of electric
shock, comments appear supported by the hazardous
voltage warning triangle.
Intended Use
Intelligent charging with power to spare. Charge two
V-Mount or Gold-Mount batteries simultaneously while
powering your camera accessories with the lightweight
and portable Anton/Bauer VM2, GM2 battery charger.
Lithium-ion batteries, like the Anton/Bauer GO 90 (98Wh
8A) charge in approximately 3 hours. The XLR4 outputs
DC power when charging or can be used to deliver
battery power to devices that have an XLR input.
Electrical Connection
WARNING! Risk of electric shock. Do not remove
cover, no user serviceable parts inside the product.
WARNING! Risk of electric shock. Always check
cables for signs of damage. Damaged cables can
cause personal injury and/or damage the equipment.
WARNING!
It is the responsibility of the local
organization to ensure that the product is periodically
checked for electrical safety in accordance with local
regulations.
CAUTION!
This product must be connected to a
power supply of the same voltage (V) and current (A)
as indicated on the product. Refer to the technical
specifications for the product.
CAUTION! AC Mains plug or appliance coupler is to
be used as a power disconnect device; make sure it is
readily accessible.
CAUTION! All data connections to other devices must
be made using shielded cables.
CAUTION! Using alternative power sources will
invalidate the system EMC liability.
CAUTION! Do not exceed the current output limit of
the product when powering auxiliary devices.
SAFETY