Anton/Bauer 8475-0141 User Manual Download Page 13

13

This warranty for the product specified in this document (“Product”) is 

given by Vitec Production Solutions (“Anton/Bauer”), 14 Progress Drive, 

Shelton, Connecticut 06484. If you (the purchaser of the Product from 

Anton/Bauer, or the person for whom the Product was purchased, if it 

was a gift) have any questions regarding Product applications, Product 

specification, or to obtain warranty service on this or any Anton/Bauer 

product, contact the company at the address above.

This product must be registered with Anton/Bauer within 30 days of 

purchase to assure warranty coverage. Register online at:

www.antonbauer.com

Warranty registration, including the serial numbers of 

 

Anton/Bauer chargers used with this battery, must be supplied to 

Anton/Bauer. Anton/Bauer will warranty the Product only against 

defects in material and workmanship for the period as follows from 

the date of purchase, in accordance with the terms set forth below, 

and then, only if the Product is used exclusively in conjunction 

with compatible Anton/Bauer chargers. If this battery or product 

is returned to Anton/Bauer for warranty service it will be required 

that you provide model names and serial numbers of compatible  

Anton/Bauer chargers with which this product was used. 

Warranty 12 months: Anton/Bauer will repair or replace the Product at 

Anton/Bauer’s option and cost. 

This warranty shall be effective only if Anton/Bauer receives notice of such 

defects in materials or workmanship during the period of the warranty. 

The liability of Anton/Bauer hereunder is expressly limited to a claim for 

repair or replacement of the Product or as otherwise stated herein at 

Anton/Bauer’s sole discretion. Notice of any claim under this warranty 

shall be delivered to Anton/Bauer during the period of the warranty 

and the Product shall be returned with its packaging promptly, at your 

expense, to an Anton/Bauer Customer Support Center or to the address 

above. Upon receipt of the Product and a record of your compliance with 

the conditions of this warranty, Anton/Bauer will repair or replace the 

Product and return it to you, or issue a credit, as applicable. You are 

responsible for all shipping and handling charges to and from authorized 

facility. 

This warranty does not apply to and is void in the case of defects or 

damage resulting from accidents, disaster, neglect, misuse, improper 

installation, improper or unauthorized service or maintenance, 

unauthorized replacement parts or attachments; or dysfunction or 

malfunction of, or caused by, any other product or device.

Misuse includes any use of the Product in other than its intended 

application, including the use of this Product with any charging device 

or accessory not manufactured by and/or specified by Anton/Bauer. This 

warranty does not cover, and Anton/Bauer assumes no responsibility for, 

any equipment or devices used in conjunction with the Product.

Anton/Bauer disclaims any liability for incidental or consequential 

damages for breach of any written or implied warranty of the product. 

Under no circumstances will Anton/Bauer be responsible for any special, 

incidental or consequential

Damages.

This Warranty is to be construed and enforced in accordance with the 

law of the State of Connecticut, including the provisions of the Uniform 

Commercial Code as adopted and from time to time amended in the 

State of Connecticut, and not the Convention for the International Sale 

of Goods. This choice of Connecticut law is exclusive of any Connecticut 

law that would require reliance on any law foreign to Connecticut.

Warranty

Summary of Contents for 8475-0141
















Reviews: