Control Settings and Connecting Your Classico CLS-10 / 12
Caution:
Failure to turn off the receiver, surround sound processor/preamp or amplifier and unplug it
from the power outlet before connecting your subwoofer may result in damage to your system. You
should always turn off these components before making or changing any connections. Keep the
subwoofer unplugged from the AC source until you have made all connections as well.
Important Note:
The recommendations here concerning crossover settings and using the high or low
level connections are based upon most typical satellite/subwoofer systems. Please check the
recommendations for these settings contained in the instructions for your satellite speakers and follow
those first. If there are no instructions, you can check on the satellite speaker manufacturers’ website
or contact the manufacturer directly. Certain Gallo satellite speakers have such recommendations in
the Owner’s Manual, and these should take precedence over the information here.
Note:
Please refer to the above graphic for all issues regarding connections and controls.
230V
115V
~100-120V/60Hz Fuse:T5.0AL/250V
~220-240V/50Hz Fuse:T2.5AL/250V
Input voltage
www.roundsound.com
Chatsworth.CA.USA
A C O U S T I C S
ANTHONY GALLO
CAUTION
PAS OUVRIR
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS:
RISQUE DE CHOC ELECTRIQUE-NE
WARNING:
SHOCK HAZARD-DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF FIRE,REPLACE
WITH ONLY THE SAME TYPE AND RATING OF FUSE
MODEL NO: CLS-10
SN#
POWERED SUBWOOFER
CAUTION VORSICHT
BEFOREOPENING
PULL MAIN PLUG
VOR DEM ÖFFNEN
NETZSTECKER ZIEHEN
HIGH LEVEL IN
HIGH LEVEL OUT
L -
L +
L +
R +
R +
L -
R -
R -
MAX
200Hz
50Hz
MIN
PHASE
CROSSOVER
BYPASS
POWER
LEVEL
L
R
CROSSOVER
BASS BOOST
BASS BOOST
LINE
LINE OUT
LINE IN
180°
ON AUTO OFF
+6dB +0dB +3dB
0°
1
2
3
4
5
6
7
8
9
10
11
LEGEND
1. PHASE TOGGLE
2. BYPASS/CROSSOVER
TOGGLE
3. LINE
IN
4. LINE
OUT
5. LEVEL
6. ON/AUTO/OFF
TOGGLE
7. BASS BOOST TOGGLE
8. CROSSOVER
DIAL
9.
HIGH LEVEL IN
10. HIGH LEVEL OUT
11. PLUG RECEPTICAL & FUSE DRAWER
7
