Installation
Unpacking and Inspection
Carefully inspect your new subwoofer immediately after unpacking. If you note any concerns or
shipping damage, please contact your dealer. Do not plug in, install, or use your CLS-10 / 12 if it
appears damaged.
Record the serial number found on the back of your AGA Subwoofer here: ________________________
Please go to http://www.roundsound.com/product-registration.php and use the serial number(s) above
to complete your warranty registration.
Note:
We encourage you to retain all packaging from your product in case you need to transport or
ship it in the future. Many AGA products utilize packaging materials that are not available off the
shelf due to their unique and unconventional shapes.
Additional Items Required for Installation
The following additional items may be required when installing your Classico CLS-10 / 12 and
connecting it to your system:
Connecting Wire: If you are connecting through Line level, you will need at least one appropriate-
length, high-quality, RCA-type unbalanced audio cable. If you wish, you can run two cables, one for
each channel to the CLS-10 / 12.
If you are connecting using High (speaker) level, AGA recommends high-quality, 18-ga. or larger
connecting wires.
There are many quality speaker and RCA wires available. You can discuss the possibilities with your
AGA dealer.
Adjustable Wrench:
A small adjustable wrench can be used to carefully tighten the High level speaker
connections if you are using them.
Attaching the Grilles:
The Classico Series grilles are held on to the speakers by magnets imbedded in
the baffle itself. Simply place the grille carefully in position, and it will “latch on” to the subwoofer.
6
