Anthem AVM 2, Operating Manual

Page: 48 / 70

43
• Volume Speed: This sets how quickly the volume changes for each ‘turn-of-the-knob’ or press of
the Remote Control Volume keys. Choose either ‘Slow’ or ‘Fast’.
VOLUMES Example: Set ZONE2 Maximum Volume to ‘+5.0 dB’.
• Enter the Setup Menu (section 7.1). Go to ‘6. VOLUMES’ and press SELECT ( ‘Select’ ) .
• Press the
6
( ‘Down’ ) key until you reach “d. ZONE2 MAX VOL: +10dB”.
• Use the
34
keys ( MASTER CONTROL KNOB ) to change to ‘+5.0 dB’.
• When finished press
56
( ‘Down’ / ‘Up’ ) to go to another Menu Item, or...
• Press the EXIT ( ‘ B a c k ’ ) key to leave the submenu and return to the Setup Menu.
7.4.7 TIME / TIMERS
The time and date, plus 4 different timers are set in this menu. The timers in the AVM 2 are similar to an alarm
clock, but allow two different timer settings for each of MAIN and ZONE2. Menu items 7.d to 7.f will be
described first, followed by timer options, 7.a to 7.c.
(menu 7.d-f) Setting Current Time and Day:
• Enter the Setup Menu (section 7.1). Go to ‘7. TIME / TIMERS’ and press SELECT ( ‘Select’ ) .
• Press the
6
( ‘Down’ ) key until you reach “d. TIME FORMAT: 12 Hr”.
• Use the
34
keys ( MASTER CONTROL KNOB ) and choose ‘12 Hr’ or ‘24 Hr’.
• Press the
6
( ‘Down’ ) key to go to “c. CURRENT TIME: 12:00 AM”.
• Press SELECT ( ‘Select’ ) . ‘12’ will be highlighted in red.
• Use the
56
keys ( MASTER CONTROL KNOB ) to set the cur rent hour. Continuing through ‘12’ will
advance the AM/PM settings.
• Press the
4
( ‘Down’ ) key. ‘00’ minutes will be highlighted.
• Use the
56
keys ( MASTER CONTROL KNOB ) to set current minutes.
• Press the SELECT ( ‘Select’ ) or EXIT ( ‘ B a c k ’ ) key to go back to the menu line.
• Press the
6
( ‘Down’ ) key to go to “f. CURRENTDAY: Sunday”.
• Use the
34
keys ( MASTER CONTROL KNOB ) to set the cur rent day.
7. ADVANCED SET-UP
continued …
7. TIME/TIMERS
a. ALLTIMERS : Disabled
b. SET MAIN TIMERS
c. SET ZONE2 TIMERS
d. TIME FORMAT: 12 Hr
e. CURRENT TIME: 12 : 00 AM
f. CURRENT DAY: Sunday