Anthem AVM 2, Operating Manual

Page: 39 / 70

ANTHEM AVM 2 SETUP MENU
1. RENAME SOURCES
2. AUDIO IN FORMAT–MAIN
3. SPEAKER CONFIGURATION
4.
LISTENER POSITION
5. SPEAKER LVL CALIBRATION
6. VOLUMES
7. TIME/TIMERS
8. TRIGGERS / IR / RS-232
9. DISPLAYS / SELECTION TIME
10. SAVE / RESTORE SETTINGS
11. LOCKOUT / PASSWORDS
34
7. ADVANCED SET-UP
continued …
Note: The last change made to a Setup Menu item will always be the “entered” result. If you make a
change to a Setup Menu item and then decide you don’t want it to change after all, you must go
back to that Setup Menu item and adjust it back to the original setting.
7.4 ANTHEM AVM-2 SETUP MENU
With your TV Monitor connected as described at the beginning of this section, enter the Setup Menu as
described in section 7.1. Your On-Screen display will show the following information:
Note: Due to the On-Screen character size, your monitor will not show more than 8 sub-menu entries
at one time. To view any remaining sub-menu entries, simply scroll
6
(‘Down’) to show any
remaining menu items. In this section, the manual will always show all available sub-menu
items for each section.
Follow the navigation instructions as outlined in section 7.2 to locate and make changes to Menu items.
For Example : Let’s say you want to set the actual distance from speaker(s) to the listening position (section
7.4.4). Here is what you would do: ( Note: Front Panel keystrokes are indicated in brackets.)
• Enter the Setup Menu (section 7.1).
• Press the
6
( ‘Down’ ) key until you reach “4. LISTENER POSITION”.
• Press SELECT ( ‘Select’ ) . This will bring up the “4. LISTENER POSITION” Submenu.
• Use the
65
( ‘Down’ / ‘Up’ ) keys to scroll to the speaker(s) that you want to change.
• Use the
34
keys ( MASTER CONTROL KNOB ) to change the distance.
• Press the EXIT ( ‘ B a c k ’ ) key to leave the submenu and return to the Setup Menu.