XM-100 Commercial Satellite Audio Receiver
14
Setting Options Via Menus
The XM-100 SETUP Mode allows you to configure options such
as forced tuning, blocking, skipping, etc.
To enter the SETUP Mode, press and hold the MODE button on
the front of the unit for 4 seconds or depress the SETUP button
on the remote. The Setup indicator illuminates, and the menu
shown below appears.
Setup Menus
Mode to Exit
Navigating Setup Menus
The top level structure of the menu system is shown below
and indicates which parameters may be configured. In SETUP
Mode, the channel up/down buttons on the unit or remote
control are used to scroll though the menu options. The Mode
button or Setup button on the remote is used to descend to a
sub-menu, or to exit up to a higher level.
At the top level menu heading shown above, pressing the
Mode button on the unit or remote control exits to normal unit
operation. You must navigate back to this menu using the
up/down keys for the Mode button to exit back to normal
operation of the unit. To help avoid confusion, with few
exceptions (in sub menus of blocking or skipping), pressing the
power button on the unit or remote control will exit out of
Setup Mode and restore normal operation. If you feel stuck in
a submenu - press the power button to get out.