7
Satellite IN
Antenna IN
Out to
TV
TV 2
TV 1
Out to
TV
TV 2
TV 1
To Antenna
Wall Plate
Rear view
Satellite Receiver (Rear view)
Satellite IN
Satellite Receiver (Rear view)
6. If the coach is equipped with a push button
type video selector switch, connect the coax
from the “TV OUT” on the Receiver to “Aux”.
NOTE: Always make sure the TV set is on
the proper channel (3 or 4) as marked on the
rear of the Receiver.
Figure 9
Figure 8
Splitter
5. If the Coach is equipped with an amplified antenna
and is prewired for Satellite, connect an RG-6 cable
from the connector marked
satellite
on the wall plate to
the rear of the satellite receiver “Satellite IN”. From the
satellite receiver “Out to TV” go to the center connector
on the rear of the wall plate (Fig. 9). Use the switch on
the wall plate to get the signal for the antenna or
satellite. When the switch in front of the wall plate is
ON the signal from the antenna will go to both TV’s.
When the switch is OFF the signal from the satellite
receiver will go to both TV’s.
