Antelope Orion Studio HD, Owner'S Manual

Page: 12 / 32

10
● Talk Back MON: Sets weather the talk back mic will be outputted by
the monitor outs.
● Factory Reset: Performs a factory reset on the unit. Please note that
by doing so all presets, mixer and FX settings will be lost.
To scroll up and down, use the Rotary Control.
To enter each one of the sub-menus, press the Rotary Control.
To confirm a chosen setting, press and hold the Rotary Control.
Hold down the second Function button to access the Control Menu of the
device, which allows you to adjust:
● Clock Source: Sets the clocking source for the Orion Studio HD.
● Sample Rate: Changes the sample rate of the Orion Studio HD.
● SR Conversion: Sets weather or not the the S/PDIF input is sample
rate converted to match the sample rate of the Orion Studio internal
clock (eg. If you want the clock to run at 192 kHz and your S/PDIF
input is at 44.1 kHz, simply press this button to match the sample rate
frequency of the Orion Studio HD internal clock).
● Peak Meter: Selects what is being displayed on the Meter screen of
the Orion Studio HD.
● Monitor Trim: Sets the trim levels for the monitor outs
● Line Out Trim: Sets the trim levels for the line outs
● Brightness: Sets the brightness for the units display Screen
To scroll up and down, use the Rotary Control.
To enter each one of the sub-menus, press the Rotary Control.
To confirm a chosen setting press the Rotary Control.
8. Headphone outputs
Two independently assignable headphone outputs, selectable and
controllable via the main volume control knob. The lights next to the
outputs are illuminated to indicate which headphone output is currently
controlled.
9. Re-amp outputs
These outputs are direct outputs that should be used with guitar
amplifiers for re-amping.