Antelope GOLIATH HD, Owner'S Manual

Page: 12 / 32

10
5. Front Panel Explained
1. 2 Re-amp outputs
These outputs are direct outputs that
should be used with guitar amplifiers for
re-amping.
2. 4 Instrument Inputs
Hi-Z Inputs with dedicated rotary control
knobs. Hi-Z Inputs are suitable for connect -
ing instruments such as bass or guitar to
the Goliath HD.
3. High resolution “capacitive touch” TFT
display
Multi function touch screen that displays
various information and gives control over
certain functions of the device.
4. Channel Gain Control knobs /
Input Selectors
To adjust the input signal of the channel,
turn the knob left/right. Value can be
adjusted in 1 dB steps. The peak indicator
lights in response to the level of the input
signal. Press and hold the rotary knob to
mute the corresponding channel.
To switch between the input modes (Mic,
Line, Hi-Z on inputs 1-4) press the rotary
knob. Please ensure that your selection
matches the type of input signal.
5. Talkback mic
Press the talkback button, located onto
main display to activate the talkback
microphone. This can be distributed to
the selected headphones and/or monitors
using the software control panel.
6. Main Rotary Knob with LED Ring
Press the knob to cycle through and/or
change the volume levels of Monitor, Line,
HP and Reamp outs. The LED Ring shows
the Volume Control or Mute status of the
selected output.
7. Mono Button
Changes from Stereo to Mono the current
output that is selected by the Main Rotary
Control
8. Antelope Button
Accesses various menus in combination
with other buttons.
Antelope button & Mono button: Enters
touch screen calibration mode.
Press and hold the Mono Mute
button before powering on the device:
Factory Reset Combo.
9. Mute Button
Mutes the current output that is selected by
the Main Rotary Control
10. 2 Headphone outputs
Two independently assignable headphone
outputs, selectable and controllable via the
main volume control knob. The lights next
to the outputs are illuminated to indicate
which headphone output is currently
controlled.