- 1 -
SFX-1000 & SFX-1500
Security Smoke Generator User Manual
Thank you for choosing Antari security smoke generator. Please read this instruction carefully prior to
operation.
Warning!
＊
Hot nozzle! Keep at least 50 cm distance.
＊
The heater of the generator is extremely hot. Please be careful when the front cover is opened.
＊
No user serviceable parts inside. Please contact with an authorized dealer when maintenance is
required.
＊
Please disconnect power before change fuse.
＊
Please operate only with adult supervision.
＊
Only Antari smoke fluid should be used. Other fluid may damage the equipment or cause dangers
to human physical safety.
＊
Do not use without smoke fluid.
＊
For indoor use only. Please keep dry.
＊
Please clear smoke away from room after an ejectment. Otherwise, residue might be caused.
Package
Before starting installation Antari security smoke generator, please make sure that you have all the
following equipments:
●
1 × Antari security smoke generator
●
1 × Smoke fluid bladder
●
1 × Mounting set
●
1 x User Manual
Controlling of Smoke
The three sets of terminal blocks on the PCB of Antari smoke generators, Alarm, Trigger, and Hold-off
are the keys to generate smoke. In order for generator to produce smoke in the critical moment, the
three sets of connections must be closed circuit at the same time, which can avoid wrong action of
making smoke. For instance, both Alarm and Trigger can be set up as switches on the security system
control panel. On the other hand, Hold-off usually can be connected to a PIR (motion detector) or a
window/door sensor. However, please note in order to stop making smoke, either Trigger or Alarm has
to be released (open circuit). Only releasing Hold-off cannot stop smoking.
