Antari S-100II, User Manual, Page: 4 / 32

4

Never add flammable liquids of any kind (oil, gas, perfume) to the snow liquid.

Pay attention to all warning labels and instructions printed on the exterior of your ANTARI
S-100II and S-200 Silent Snow Machines.

Use only the high-quality snow liquid that your dealer recommends.

Always make sure there is sufficient liquid in the machine's liquid tank.

If your ANTARI machine fails to work properly, discontinue use immediately. Drain all liquid
from the tank, pack the unit securely (preferably in the original packing material), and
return it to your ANTARI dealer for service.
Unpacking & Inspection
Open the shipping carton and verify that all equipment necessary to operate the system has
arrived intact.
If any equipment is missing contact your ANTARI dealer immediately.
The shipping carton should contain the following Items:
1. Snow machine with power cable
2. SC-2 volume remote controller
3. Fluid tank
4. Hanging bracket
5. Screw set and user manual
Before beginning your initial setup of either the ANTARI S-100II Snow Machine or the ANTARI
S-200 Silent Snow machine, make sure that there is no evident damage caused by
transportation. In the event that the unit's housing or cable is damaged, do not plug it in and do
not attempt to use it until after contacting your ANTARI dealer for assistance.
Setup
1. Remove all packing materials from shipping box. Check that all foam and plastic padding
is removed.
2. Place the machine on a flat surface and follow step below.
DANGER OF BURNING!
Never touch the device during the operation!