background image

©  2019 Antari Lighting and Effects Ltd.   

www.antari.com

 

 

 

Safety Information 

 

Please read the following safety information carefully before operating the machine. 

This information includes important safeguards about installation, usage, and 

maintenance. Pay attention to all warning labels and instructions in this manual and 

printed on the machine. 

 

If you have questions about how to operate the machine safely, please contact your local Antari 

dealer for help. 

 

Keep this device dry. 

 

Always connect to a grounded circuit to avoid risk of electrocution. 

 

Before connecting the machine to power, always check the voltaged indicate on the machine 

matches to your local AC voltage. Do not use the machine if AC power voltage does not match. 

 

Disconnect the machine from AC power before servicing and when not in use. 

 

If the supply cord is damaged, contact your local Antari dealer for replacement. 

 

This product is for indoor use only! Do not expose to rain or moisture. If fluid is spilled, 

disconnect AC power and clean with a damp cloth. If fluid is spilled onto electronic parts, 

immediately unplug the machine and contact your local Antari dealer for advice. 

 

No user serviceable and modifiable parts inside. Never try to repair this product, an 

unauthorized technician may lead the machine to damage or malfunction. 

 

For adult use only. Children being supervised not to play with the machine. Never leave the 

machine running unattended. 

 

The machine is not to be used by persons (including children) with reduced physical, sensory 

or mental capabilities, or lack of experience and knowledge. 

 

Installed in a well ventilated area. Provide at least 50 cm space around the machine. 

 

Never add flammable liquid of any kind to the machine. 

 

Make sure there are no flammable materials close to the machine while operating. 

 

Only use Antari fluid. Other fluid may lead to heater clog and malfunction. 

 

If the machine fails to work, unplug the machine and stop operation immediately. Contact 

your local Antari dealer for . 

 

Before transporting the machine, make sure the fluid tank is completely drained. 

Summary of Contents for M-11













Reviews: