Antari Fog Jet W-715, User Manual

Page: 5 / 12

5
requirement for the machine refer to the label on the back of the machine.
Always connect the machine to a protected circuit and ensure it is properly
grounded to avoid risk of electrocution.
Step 4: Turn on the machine by connecting the power cord and turning the Neutrik
Powercon. Heat up takes approximatly 9 minutes. Once the machine has reached operating
temperature, the LCD screen will display “Ready To Fog”. Now the machine is ready for
operation.
Step 5: To turn off the machine, turn the Neutrik Powercon again.
Language Setting
To switch the language used for control interface, press [Menu] button BEFORE turning on
the machine and HOLD it until LCD screen flashes for two times. After the two flashes, press
[Menu] to choose the language: English and
中文
(Chinese).
Operation
Control Panel
The machine can be operated with the LCD control panel located on top of the fogger.
Button Function
[Menu] Select from functions
[
▲
/ Timer]
To increase value or choose from options
To activate Timer Mode
[
▼
/ Volume]
To decrease value or choose from options