Antari Fog Jet W-715, User Manual

Page: 10 / 12

10
2. Once wireless remote control function is activated, the LCD screen will display “Wireless
Detect …” everytime when the machine is turned on; this allows new registration. Every
new registration overwrites the previous memory.
3. One machine can be controlled by up to 5 transmitters while one transmiter can be
registered to unlimited machines.
4. Battery used in transmiter: type A27S 12V.
5. When under 2-Second Jet Mode, pressing the button (A or B) on the trasmitter will emit
fog for 2 seconds with maximium output (100%).
Power Saving

Keep pressing [Stop] button for 3 seconds, LCD screen will display the countdown of 60
seconds. After the countdown, the machine will go into sleep mode. To wake the
machine again, press any button.

When the machine is idle for 15 seconds, the backlight of the LCD screen becomes dim.
To light up again the LCD screen, press any button.

When DMX connector is disconnected from the machine, the machine will go into sleep
mode, and when DMX connector is re-connected to the machine again, the machine will
be waked up.
Liquid
Only use Antari FLC water-based liquid for the W-715 Fogger. The machine is tested and
calibrated with this liquid to get the best output performance. Warranty will be void if any
other type of liquid is used, improper use of liquid may lead to machine failure and
malfunction.
Service and Maintenance

Do not allow the machine to become contaminated.

Remove dust from air vents with air compressor, vacuum or a soft brush.

Only use a damp cloth to clean the casing.

Before storing run distilled water through the system to help avoid condensing the pump
or heater.

It is recommended to run the machine on a monthly basis in order to achieve best
performance and output condition.