6
Operation
Plug power cord into a grounded electrical outlet. T
urn power switch on rear of unit to “ON”
position. The machine starts to warm up and the red light on the remote control will be on. When
warm-up is complete the red light is off.
To emit fog, press the button on the remote and hold for the desired length of time.
The remote unit’s light will cycle on and off as the machine re-heats to the proper operating
temperature.
F
or further information on operating your Antari Fog Machine, see the section titled, “Remote
Control Operation”.
Installation
The F-80Z fog machine includes a mounting bracket designed for overhead installation. This bracket
allows the unit to be hung from lighting equipment trussing or other suitable supports.
The unit can also be operated at floor level or sitting on any regular surface as well.
If the unit is to be mounted using the bracket, it is important that the fog does not shoot directly at any
one’s face. Therefore, do not point the nozzle in a direction that will aim directly at a person.
Whatever installation method you choose, do not allow the unit to have more than a 15 degree angle
of inclination.
Remote Control Operation
FCW-80Z
3 meter ON/OFF wire remote controller.
