5
Danger of explosion
Never add flammable liquids of any kind (oil, gas, perfume) to the fog liquid.
Use only the high-quality, water-based fog liquid that your Antari dealer recommends. Other fog
liquids may cause poor effect fog,
clogging and “spitting” of unevaporated liquid.
Always make sure there is sufficient liquid in the fog liquid tank. Operating this unit without liquid
will damage the pump and the heater.
If your Antari Fog Machine fails to work properly, discontinue use immediately. Drain all fog liquid
from the tank, pack the unit securely (preferably in the original packing material), and return it to
your Antari dealer for service.
Always drain tank before shipping or transporting this unit.
If fog liquid comes in contact with skin or eyes, rinse thoroughly with water. Never drink fog liquid.
In case of ingestion, call a doctor immediately if feel not well.
Unpacking & Inspection
Open the shipping carton and check that all equipment necessary to operate the system has arrived
intact. In addition to the F-80Z, you should receive the following items:
1. FCW-80Z wired remote
2. Hanging bracket
3. 800 ml (1 quart) Liquid tank.
Before beginning initial setup of your Antari Fog Machine, make sure that there is no evident
damage caused by transportation.
In the event that the unit’s housing or cable is damaged, do not plug it and do not attempt to use it
until contacting your Antari dealer for assistance.
Setup
Remove all packing materials from the fog machine. Check that all foam and plastic padding are
removed, especially around the nozzle area.
Fill with Antari Fog Liquid or other high-quality water-based fog fluid. Any other types of fluid can
damage the unit. When filled, place cap back on liquid tank.
Firmly attach the remote control cable to the proper input on the rear of the machine.
