16
Service and Maintenance
․
Do not allow the machine and fluid to become contaminated.
․
Regularly fill distilled water to fluid tank and run the machine to clean the system.
After cleaning, refill Antari fog fluids into fluid tank and make sure the machine can
produce fog properly.
․
It is recommended to run the machine on a monthly basis in order to achieve best
Step. 6
The red-framed area is where the W-DMX
board is placed.
Step 7. Install the W-DMX onto the main PCB and
then screw the screw tightly. The installation of W-
DMX antenna and W-DMX board is completed.
Step 5.
Connect the antenna (Part #
W-DMXR onto the W-DMX
board (Part # W-DMX-PCB)
The Part Number of Optional Wireless DMX
module is W-DMX-PCBR (1 x W-DMX a 1 x
W-DMX board)
Summary of Contents for F-1 Fazer
