ANTAIRA LNX-2012GN-SFP User Manual Download Page 26

Page: 26 / 105

Antaira Technologies - Industrial Ethernet Switches

LNX-2012G-SFP Series User Manual V1.0

5.2.5 LLDP

5.2.5.1 LLDP Neighbors

The LLDP neighbor page provides a status overview for all LLDP neighbors. The table

displayed below contains a row for each port LLDP neighbor that is associated to the ports.

Label

Description

Port

The switch port number of the logical

LLDP port.

Mode

Select LLDP mode.

Rx only The switch will not send out

LLDP

information,

but

LLDP

information from neighbor units is

analyzed.

Tx only The switch will drop LLDP

information received from neighbors,

but will send out LLDP information.

Disabled The switch will not send out

LLDP information, and will drop

LLDP information received from

neighbors.

Enabled The switch will send out

LLDP information, and will analyze

LLDP information received from

neighbors.

Summary of Contents for LNX-2012GN-SFP










































































































Search results

Summary of Contents for LNX-2012GN-SFP

Reviews:

Brands by name

Popular brands

ANTAIRA LNX-2012GN-SFP, User Manual

Search results

Summary of Contents for LNX-2012GN-SFP

Reviews:

Brands by name

Popular brands