ANTAIRA LNX-2012GN-SFP User Manual Download Page 25

Page: 25 / 105

Antaira Technologies - Industrial Ethernet Switches

LNX-2012G-SFP Series User Manual V1.0

IP Mask

Assign the subnet mask of the IP address. If DHCP client

function is enabling, you do not need to assign the subnet

mask

IP Router

Assign the network gateway for the switch. The default

gateway is 192.168.10.254

VLAN ID

Provide the managed VLAN ID. The allowed range is 1

through 4095.

DNS Server

Provide the IP address of the DNS Server in dotted decimal

notation.

Click to save changes.

Click to undo any changes made locally and revert to

previously saved values.

5.2.4 SSH

Label

Description

Mode

Indicates the SSH mode operation. Possible modes are:

Enabled: Enable SSH mode operation.

Disabled: Disable SSH mode operation.

Click to save changes.

Click to undo any changes made locally and revert to

previously saved values.

Table 5.2.3

– IP Setting Information Description

Summary of Contents for LNX-2012GN-SFP










































































































Search results

Summary of Contents for LNX-2012GN-SFP

Reviews:

Brands by name

Popular brands

ANTAIRA LNX-2012GN-SFP, User Manual

Search results

Summary of Contents for LNX-2012GN-SFP

Reviews:

Brands by name

Popular brands