Antaira Technologies - Industrial Ethernet Switches
LNP-0500G-bt-24 Series User Manual V1.1
6
Amber
On
IEEE 802.3af/at connection
(Single Signature PD Class 0~4)
Off
No powered-device attached or power supplying fails
LAN Port 5
(Upper LED)
Green
On
Connected to network, 1000Mbps
Blinking
Networking is active
Off
Not connected to network
LAN Port 5
(Lower LED)
Green
On
Connected to network, 10/100Mbps
Blinking
Networking is active
Off
Not connected to network
2.5 Dip Switch
The 4-pin Dip Switch on the front panel of the Ethernet Switch works as the PoE controller for PoE
Port 1~4.
ON
OFF
Dip Switch 1
Enable Port 1 PoE Function
Disable Port 1 PoE Function
Dip Switch 2
Enable Port 2 PoE Function
Disable Port 2 PoE Function
Dip Switch 3
Enable Port 3 PoE Function
Disable Port 3 PoE Function
Dip Switch 4
Enable Port 4 PoE Function
Disable Port 4 PoE Function
2.6 Relay Contact Alarm Warning
2-pin 1*24VDC@1A resistive normal open on 6-pin terminal block.
The relay contact alarm will be triggered when anyone of the listed events occurs.
Key trigger event 1: Power-1 or Power-2 is inactive
Key trigger event 2: PoE total loading >100% PoE output budget
Key trigger event 3: PoE over current per port
Key trigger event 4: Cable short per port
Key trigger event 5: One of the channels in Dual PD fail
Table 2.1
LED Indicators for LNP-0500G-bt-24 Series
