Antaira Technologies - Industrial Ethernet Switches
LMP-1002G-10G-SFP-24 Hardware Manual V1.0
14
5. Technical Specifications
Table 5.1
has the technical specificati
ons for Antaira’s LMP-1002G-10G-SFP-24:
Standards
IEEE 802.3
10Tx Ethernet
IEEE 802.3u
100Tx Fast Ethernet
IEEE 802.3ab
1000Tx Gigabit Ethernet
IEEE 802.3z
Gigabit Fiber
IEEE 802.3ae
10 Gigabit Ethernet
IEEE 802.3af/at
Power over Ethernet
IEEE 802.3x
Flow Control for Full Duplex
IEEE 802.3ad
Port Trunk with LACP
IEEE 802.3d
STP (Spanning Tree Protocol)
IEEE 802.3w
RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s
MSTP (Multiple Spanning Tree Protocol)
ITU-T G.8032/Y.1344
ERPS (Ethernet Ring Protection Switch) Protocol
IEEE 802.1Q
VLAN Tagging
IEEE 802.1x
Network Authentication
IEEE 802.1AB
LLDP Link Layer Discovery Protocol
IEEE 802.1p
QoS/CoS Protocol for Traffic Prioritization
Switch
Properties
Protocol
IPv4/IPv6, SNMP v1/v2c/v3, LLDP, LLDP-MED, HTTP,
HTTPS, SSHv2 telnet, DHCP client, DHCPv6 client, DHCP
server, Port Mirror, DNS client/proxy, IP based Access Filter,
ICMPv6, syslog, Time Zone /Daylight Saving, NTP client,
RMON, sFlow, Loop detection, Console Port, Power Lost
Warning, Relay Trigger
Switch Architecture
Back-Plane (Switching Fabric): 56.0Gbps
Processing Type
Store and Forward
Flow Control
IEEE 802.3x for full duplex mode, back pressure for half
duplex mode
Transfer Rate
14,880pps for 10Base-T Ethernet
148,800pps for 100Base-T Fast Ethernet
1,488,000pps for Gigabit Ethernet
14,880,000pps for 10 Gig Ethernet
Packet Buffer
8 Mbits
Jumbo Frame
9.6K
MAC Table Size
16K
VLAN Group
0 ~ 4094
IGMP Group
Up to 1024 Group
Port Interface
Ethernet Port
8*10/100/1000BaseTx auto negotiation speed, Full/Half
duplex mode, and auto MDI connection
Fiber Port
2*1G/10G SFP+ Slots
Wavelength
Depends on SFP modules
RS232 Serial Console
1*RS232 in RJ45 connector with console cable, 115.2Kbps, 8,
N, 1
Configuration Backup
1*USB 2.0
